Tin-plated plates obtained directly from sheet metal. These are used as bases for the chaplets whenever it becomes necessary to increase height or extend basic surface area so as to prevent the collapse of the chaplet itself. The suitably perforated plates can act as filter to make the immediate filling of the casting basin easier and make any impurities float.
Working with foundry chaplets for foundries means finding the perfect balance between the chaplet melting (joining with the casting) and its resistance to deformation. It is essential to identify the most suitable chaplet for each type of casting, and for each position inside the casting itself.
We provide an infinite combination of diameters, thicknesses, heights, forms, stems and customised options. There is always a foundry chaplet suited to your needs, ranging from thin walls with thicknesses of just a few millimetres and with cool temperatures, to larger thicknesses and close to the casting inlet channels.
And if you have very special requirements, we are available to guide you in creating your own customised chaplet. The best chaplets are always developed from teamwork between your and our technicians!
|DIMENSION||Ø 12||Ø 15||Ø 20||Ø 30||Ø 40||Ø 50||20 x 20||25 x 25||25 x 50||30 x 30|
|THICKNESS||0,5 - 1,0||0,5 - 1,0 - 1,5||0,5 - 1,0||0,5 - 1,0||0,5 - 1,0||1,0 - 2,0||0,5 - 0,8 - 1,0||0,5 - 1,0||1,0 - 1,5 - 2,0||1,0 - 1,5 - 2,0|
|HOLE DIAMETER||1,5 - 2,0||2,0||2,5||2,0||2,0||2,0||3,0 - 4,5||3,0 - 5,0||3,5||3,0 - 4,0|
|DIMENSION||30 x 60||40 x 40||40 x 80||50 x 50||50 x 100||70 x 70||Ø 50||Ø 90||50 x 70||50 x 90||55 x 55|
|THICKNESS||1,0 - 1,5 - 2,0 - 3,0||1,0 - 1,5 - 2,0 - 3,0||1,5 - 2,0 - 3,0 - 4,0||1,5 - 2,0 - 3,0 - 4,0||1,5 - 2,0 - 3,0 - 4,0||1,5 - 2,0 - 3,0 - 4,0||0,3||0,3||0,3||0,3||0,3|
|HOLE DIAMETER||4,0||3,0||4,0 - 7,0||3,0 - 4,5||4,5||3,0 - 10,0||18,0||18,0||18,0||18,0||2,0|